Car / Automotive Bearing, Deep Groove Bearing

FC Bearing Company can manufacture and offer a wide range of bearings, such as automotive bearings, water pump bearings, clutch bearings, deep groove bearings, mini bearings, rubber bearings, plastic bearings.
Established in 1990, has experienced more than 20 years making various bearings, which is good teacher to tutor us how to manufacture high quality bearings.

    1. Thin Wall Ball Bearing
    2. Thin Wall Ball BearingUsually, if a bearing aperture is four times bigger than radial section, it is called thin wall bearing. The main features are: light weight, high rigidity, small section, good bearing performance and various sections and dimensions. It can solve many design problems which cannot be solved by conventional bearings. There are three kinds of structure of thin wall ball bearing: 68, 69, and 16 series...
    1. Double Row Deep Groove Ball Bearing
    2. Double Row Deep Groove Ball BearingDouble row deep groove ball bearing is of similar design with single row bearing. It has no ball installation gap so it can bear bidirectional axial loads.With dust lid or oil seal also list the single row deep groove ball bearing as a standard product, which is of the most commonly used size of a single or bilateral dust lid(non-friction oil seal) and SEAL (low friction and friction seal)...
    1. Deep Groove Ball Bearing with Stop Ring
    2. Deep Groove Ball Bearing with Stop RingThere is a rectangular slot installed on the outer ring of the bearing, which is used for installing stop rings. After assembling the stop ring, it can facilitate the axial location of the bearing in the shell holes of the main engine. Thus, the axial size of the main engine is reduced. This kind of bearing is usually equipped with dust lids or seal rings at both sides to prevent dirt intrusion...
    1. Miniature Bearing (Mini)
    2. Miniature Bearing (Mini)The products are categorized into: dust lid series, series with seal ring, series with flange, stainless series and so on. They are applied to various high precision industrial machines, small rotary machine and so on. With the increasing needs for minimization, light-weight and thin wall, there will be a brighter market prospect for the Miniature bearing. They are mainly used in fan motors, mini-motors, pressure rotors...
    1. Clutch Release Bearing
    2. Clutch Release BearingThis project is newly developed by our company in accordance with the latest market demands.The clutch release bearings are categorized into general release and automatic aligning clutch release bearings. The former type applies to vehicles of general performance requirements, such as heavy-duty vehicles, minibus and small trucks. Due to its special inner structure...
    1. Non-standard Bearing
    2. Non-standard BearingNon-standard bearings generally refer to the bearings which are not belong to the conventional twelve types. They are noted for special structures, different dimension and rotary precisions with standard bearing, small production batches and difficult processing.
      This produces by our company include zinc-plated surface type, square or polygonal inner holes type...
    1. Plastic Covered Bearing
    2. Plastic Covered BearingIt is a kind of Non-standard bearing, which is injected and molded on the basis of general deep groove ball bearing. It is widely used in doors, windows, toys, elevators, transmission machines and other fields. Our company can manufacture plastic-covered bearings according to the customers' orders...

Our company is located on Hangzhou bay, 3 hours driving away from Shanghai China, where has developed industrial production chain, that means we can purchase any material of making bearings in our city, it save production cost which give our customers more opportunity to gain high quality with competitive price. Zhejiang, where our factory located, is a international harbor city, has many shipping company here, low shipping cost offer more benefit to our customers too.